Analysis And Problem Solving; Problems, Causes And Solutions - Skymsen AMP-400 Manual De Instrucciones

IMPORTANT
Always unplug the machine when emergency cases arise.
4.7Advice
Electrical or mechanical maintenance must be done by qualified personal for such
operation.
Person in charge has to be sure that the machine is under TOTAL SAFETY conditions when
working.
5. Analysis and Problems Solving
5.1 Problem, causes and solutions
This equipment has been designed to operate with the need of minimum maintenance but
the natural wearing caused by longer use of the equipment may occasionally cause some
malfunctions.
If such problem occurs with your Blender refer to Table 02 in which the most common
situations are listed with recommended solutions.
32