Programming Example - GiBiDi BA230 Manual De Instrucciones

28
UK
-
ESC
-
ESC

PROGRAMMING EXAMPLE

MENU A
-
ESC
-
ESC
-
ESC
4 6 8 0
+
OK
4 6 8 3
+
OK
A C F H E
+
OK
Y
A 5
+
OK
A 5
+
OK
6
The last figure is flashing.
With the + or – keys, the user selects the fourth digit of the installer
code.
When the required digit is selected, press OK to confirm and go to
step.
7
Now the installer code is complete: if it is correct, go to step 8.
If the installer code is incorrect, go back to step 2.
8
The 5 main menus appear on the display (letters A C F H E), the A is
flashing.
Use the + or – keys to select the other menus (the relative letter will
blink).
Press OK to enter the selected menu (in the example, menu A).
9
Use the + or – keys to enter the submenus (A1, A2, A3, A4,...)
Press OK to confirm the selected menu; a "Y" will appear next to the
menu to indicate that it is enabled.
10
With the + and – keys the other submenus are displayed; follow the
same procedure as above.
Press ESC to go back to the higher level (menu A, C, F, H E).
BA230