Eco Mode - Allmatic BIOS2 24V Manual Del Usuario

Press and hold the "MENU" button until the number stops blinking, then release the button. Press and hold the "MENU" button, the display will show
a count down d80,d79,...,d01 don't release the button until the display showns DoN.
NOTE - to know the type of the selected motor, move on the item menu de.f.: the display shows alternating the de.f. and the selected motor. If a
parameter changes (that depends on the motor type, see chapter 12), on the display will also appear the letter
31. VIEWING OF THE MEMORY POSITION FOR A SINGLE TRANSMITTER TR.S.
With the item of the menu tr.S. it is possible to view the memory location in which a transmitter is memorized.
To perform the function, move to tr.S. and then confirm by pressing the "MENU" button. Keep pressed the "MENU" button untill the display will show
SEE, then release the button.
At this point press a button of the memorized transmitter (it does not active any command). The display shows:
• the memory location for 2 seconds, if is memorized;
• the written not for 2 seconds, if is not memorized.
After 2 seconds the display returns to the screen SEE and it will be possible to perform this function with another transmitter.
To exit the function, press the "MENU" button. Otherwise, after 15 seconds without transmission, the control unit exits the function and shows the
written tout.
32. CANCELLATION OF A SINGLE TRANSMITTER TR.C.
With the item of the menu tr.C. it is possible to delete a single transmitter from the memory.
To perform the function, move to tr.C. and then confirm by pressing the "MENU" button. Keep pressed the "MENU" button untill the display will show
0, then release the button. Select the memory location of the transmitter. Press and hold the "MENU" button untill the display will show CLr, then
release the button.
To exit the function, press the "MENU" button. If the display shows the written ERR there are problems with the memory (for example empty position
or disconnected memory).
33. CANCELLING ALL THE TRANSMITTERS TR.F.
With the item of the menu tr.f. it is possible to erase all the transmitters learnt.
Move to tr.f., then keep pressed the "MENU" button until the display shows 0, then release the button. Press again and keep pressed the "MENU"
button, the display will show a count down d80,d79,...,d01 do not release the button until the display showns don.
34. BLUETOOTH SI.d.
Item of the menu needed for the first coupling between an Android device and the control unit. Refer to the Help of the Android application for the
connection procedure.
10 - ECOMODE
The ECOMODE function allows to increase the batteries life in the event of a black-out of the grid.
To enable the function:
  
     
UP UP UP UP UP UP UP UP UP DOWN DOWN DOWN DOWN DOWN DOWN DOWN DOWN DOWN UP UP UP
MENU MENU MENU
MENU MENU MENU MENU MENU MENU
Make sure that the Use the "UP" and
board is out from any "DOWN" buttons to
     
programming menus move inside the items
(press briefly the of the menu.
"MENU" button). Select the item EC.o.
UP UP UP UP UP UP UP UP UP
To enter the menu,
MENU MENU MENU MENU MENU MENU
press and hold the
"MENU" button for at
least 5 seconds.
During the functioning with batteries and the ECOMODE enabled, the control unit actives the motor at reduced speed (50% of the nominal speed) and
                 
all the accessories, except to the electrical lock, are switched OFF.
. . . . . . . . . . . . . . . . . .
WARNING - in this situation the safety devices ARE NOT ACTIVATED. For a greater safety, we suggest to move the automation on sight.
If during the the functioning with batteries, the power supply comes back, after 5 seconds (activation time of the accessories), the motor will be restored
UP UP UP UP UP UP UP UP UP DOWN DOWN DOWN DOWN DOWN DOWN DOWN DOWN DOWN
to the running speed and the safety devices will be again monitored.
MENU MENU MENU
MENU MENU MENU MENU MENU MENU
6-1622420 rev.5
     
UP UP UP DOWN DOWN DOWN UP UP UP
MENU MENU MENU
  
     
           
     
. . . . . . . . . . . . . . . . . .
UP UP UP DOWN DOWN DOWN
UP UP UP UP UP UP DOWN DOWN DOWN DOWN DOWN DOWN DOWN DOWN DOWN
UP UP UP
UP UP UP UP UP UP
MENU MENU MENU
MENU MENU MENU
MENU MENU MENU MENU MENU MENU
MENU MENU MENU MENU MENU MENU MENU MENU MENU
To enter the item,
   press and hold the
  
"MENU" button for at
     
least 1 second until
. . . . . .
the value blinks.
DOWN DOWN DOWN DOWN DOWN DOWN DOWN DOWN DOWN
UP UP UP UP UP UP UP UP UP
MENU MENU MENU
MENU MENU MENU
UP UP UP DOWN DOWN DOWN
MENU MENU MENU
  
     
UP UP UP UP UP UP UP UP UP DOWN DOWN DOWN DOWN DOWN DOWN DOWN DOWN DOWN
MENU MENU MENU MENU MENU MENU MENU MENU MENU
14/09/2021
  
  
. . . . . .
DOWN DOWN DOWN
UP UP UP DOWN DOWN DOWN
UP UP UP
MENU MENU MENU
MENU MENU MENU
  
  
DOWN DOWN DOWN
DOWN DOWN DOWN DOWN DOWN DOWN
UP UP UP
MENU MENU MENU
Use the "UP" and
"DOWN" buttons to
  
  
  
change the value.
DOWN DOWN DOWN DOWN DOWN DOWN DOWN DOWN DOWN
UP UP UP DOWN DOWN DOWN
MENU MENU MENU MENU MENU MENU
MENU MENU MENU
ITA ENG FRA ESP
c (for example c 1).
        
. . . . . .
DOWN DOWN DOWN UP UP UP DOWN DOWN DOWN
MENU MENU MENU MENU MENU MENU
  
UP UP UP DOWN DOWN DOWN
DOWN DOWN DOWN
MENU MENU MENU
To save the value,
press and hold the
"MENU" button for at
     
least 1 second.
. . . . . .
UP UP UP DOWN DOWN DOWN
MENU MENU MENU
TUR NLD
  
UP UP UP DOWN DOWN DOWN
MENU MENU MENU
     
  
UP UP UP DOWN DOWN DOWN UP UP UP
UP UP UP DOWN DOWN DOWN
MENU MENU MENU
MENU MENU MENU
To quit, press briefly
the "MENU" button.
  
  
UP UP UP DOWN DOWN DOWN
UP UP UP DOWN DOWN DOWN
MENU MENU MENU
MENU MENU MENU
     
. . . . . .
UP UP UP DOWN DOWN DOWN
MENU MENU MENU
21/24
  
. . .
MENU MENU MENU