Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
11 - SETTING OF THE STROKE - SINGLE MOTOR
Select the functioning with a single motor:
UP
DOWN
UP
DOWN
UP
DOWN
UP
MENU
MENU
MENU
Make sure that the
Use the "UP" and
board is out from any
"DOWN" buttons to
programming menus
move inside the items
(press briefly the
of the menu.
UP
UP
UP
"MENU" button).
Select the item nmt.
MENU
MENU
To enter the menu,
press and hold the
"MENU" button for at
least 1 second.
WARNING - For a correct functioning of the system, it is absolutely indispensable the use of mechanical stops in opening and closing.
.
.
UP
DOWN
11.1 - EASY SETTINGS OF THE STROKE - SINGLE MOTOR
MENU
Connect the automation to the MOTOR 1 output and check to have set
the nMT = 1.
Carry out a check of the menus and, if needed, customize the settings before
1.
the learning of the stroke.
The slowdowns will be those set in the menu, with the same percentage during
both opening and closing (LSI
Unlock the automation and move it to the middle of the stroke.
2.
Press at the same time the "UP" and "MENU" buttons for at least 5 seconds
until the display shows LOP.
If the automation DOESN'T MOVE in opening, press the "DOWN" button to stop
3.
the learning. The display shows L--.
Press the "SS" button to restart the procedure: the automation moves in
opening, at reduced speed.
Reached the opening mechanical stop, the motor stops automatically.
4.
WARNING - if the motor doesn't stop automatically, press the "SS"
button.
In this phase the display shows LOP.
The automation moves automatically in closing, at running speed.
Reached the closing mechanical stop, the motor stops automatically.
WARNING - if the motor doesn't stop automatically, press the "SS"
5.
button.
In this phase the display shows LCL.
The automation moves automatically in opening, at running speed.
Reached the opening mechanical stop, the motor stops automatically.
6.
WARNING - if the motor doesn't stop automatically, press the "SS"
button.
In this phase the display shows LOP.
7.
The automation moves in closing with the slowdowns set into the menu LSI.
22/24
UP
DOWN
UP
MENU
.
.
UP
UP
DOWN
UP
DOWN
UP
DOWN
UP
UP
DOWN
MENU
MENU
MENU
MENU
MENU
MENU
MENU
To enter the item,
press and hold the
"MENU" button for at
least 1 second until
DOWN
DOWN
UP
DOWN
UP
the value blinks.
UP
DOWN
MENU
MENU
MENU
UP
DOWN
MENU
≠
P).
ITA
ENG
DOWN
UP
DOWN
UP
MENU
MENU
DOWN
UP
DOWN
DOWN
DOWN
MENU
Use the "UP" and
"DOWN" buttons to
change the value.
DOWN
DOWN
MENU
UP
DOWN
MENU
SS
UP
DOWN
MENU
SS
UP
DOWN
MENU
SS
FRA
ESP
TUR
NLD
DOWN
UP
DOWN
MENU
MENU
UP
DOWN
MENU
To save the value,
To quit, press briefly
press and hold the
the "MENU" button.
"MENU" button for at
least 1 second.
UP
UP
DOWN
DOWN
MENU
MENU
UP
DOWN
MENU
5 seconds
SS
SS
SS
UP
DOWN
UP
DOWN
MENU
MENU
UP
DOWN
MENU
SS
SS
SS
UP
DOWN
UP
DOWN
MENU
MENU
UP
DOWN
MENU
SS
SS
SS
UP
DOWN
MENU
SS
UP
DOWN
MENU
SS
UP
DOWN
UP
DOWN
6-1622420
rev.5
MENU
MENU
SS
SS
UP
DOWN
MENU
.
.
UP
DOWN
UP
DOWN
UP
MENU
MENU
MENU
UP
DOWN
MENU
.
.
UP
DOWN
MENU
14/09/2021
Publicidad
Tabla de contenido
