Auto Scanning Function; Weather Forecast; Temperature And Humidity; Temperature And Humidity Trend - Oregon Scientific WMR180 Manual Del Usuario

Southern hemisphere
New
Moon
Waxing
Crescent
First
quarter
Waxing
Gibbous

AUTO SCANNING FUNCTION

To activate the outdoor temperature and humidity
auto-scan function:
1. Press SELECT to navigate to the Temperature or
Humidity Area. will show next to the Area.
2. Press and hold MODE to activate auto-scan. The
temperature and humidity display will scroll from
indoor to ch1 through to ch3.
3. Press any key to stop the auto-scan.
NOTE Channel 1 is used for the outdoor temperature
and humidity sensor. Additional temperature and humidity
sensors can use other channels.

WEATHER FORECAST

This product forecasts the next 12 to 24 hours of weather
forecast within a 30-50 km (19-31 mile) radius.
Weather Forecast Area
ICON DESCRIPTION
Sunny
Partly cloudy
Cloudy
Rainy
Snowy

TEMPERATURE AND HUMIDITY

The weather station displays indoor and outdoor
readings for:
1. Temperature / relative humidity (current / maximum /
minimum)
2. Trend line
3. Wind chill (current / minimum) and dew point level
(current/ maximum / minimum)
The weather station can connect up to
NOTE Channel 1 is dedicated for outdoor temperature
and humidity.
shows which remote sensor's data you are viewing.
appears when indoor data is displayed.
The timestamp records the date and time when storing
the temperature and humidity readings in memory.
Full Moon
To select the temperature measurement unit:
Waning
Press UNIT to select °C / °F.
Gibbous
Third
quarter
be changed simultaneously.
Waning
To view temperature (Current / Max / Min temperature)
Crescent
readings:
1. Press SELECT to navigate to the Temperature Area.
2. Press UP / DOWN to select the channel.
3. Press MAX / MIN to toggle between current / MAX /
To view humidity (Humidity, Dew point) readings:
1. Press SELECT to navigate to the Humidity Area.
2. Press UP / DOWN to select the channel.
3. Press MODE repeatedly to toggle between the
4. Press MAX / MIN to toggle between current / MAX /
The timestamp is displayed accordingly in the Clock Area.
To clear the memories and timestamp for the
temperature, humidity and dew point readings:
In the Temperature or Humidity Area, press
MAX
condensation will form.

TEMPERATURE AND HUMIDITY TREND

The trend lines are shown next to the temperature and
humidity readings. The trend is shown as follows:
The base station provides
wind speed and wind direction
information.
To read the wind direction find
the compass point the
pointing to.
The timestamp records the date and time when storing
the wind speed readings.
3 remote sensors.
To select the wind speed unit:
Press UNIT to switch between:
•
•
•
•
8
NOTE The unit of all temperature related displays will
will show next to the Area.
MIN displays.
will show next to the Area.
humidity / dewpoint displays.
MIN displays.
/ MIN to clear the readings.
NOTE The dew point advises at what temperature
RISING STEADY

WIND CHILL / DIRECTION / SPEED

Metres per second (m/s)
Kilometers per hour (kph)
Miles per hour (mph)
Knots (knots)
and hold
FALLING
is