Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
EN
OPERATION
This manual is furnished with each new model. It
provides necessary operation and maintenance
instructions and an illustrated parts list. Read this
manual completely and understand the machine
before operating or servicing.
Use the illustrated Parts List to order replacement
parts. Before ordering parts or supplies, be sure to
have your machine model number and serial number
available. Parts and supplies may be ordered by
phone or mail from any authorized parts and service
center, distributor or from any of the manufacturer's
subsidiaries.
This machine will provide excellent service. However,
the best results will be obtained at minimum costs if:
S
The machine is operated with reasonable care.
TABLE OF CONTENTS
. . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . .
EC DECLARATION OF CONFORMITY FOR MACHINERY
EN
Model: 2100, 2120, 2140,
2150, 2200, 2260
TENNANT N.V.
Address:
Industrielaan 6 5405 AB
P.O. Box 6 5400 AA Uden-The Netherlands
Uden/Netherlands, 02-28-03
Leo Suurmond - Technical Support Engineer
2
. . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . .
. . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . .
.
. . .
. . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . .
nr.: 801413, 801434, 801410, 801321, 801214, 801376, 801322, 801215, 801419, 801441, 801378,
801395, 801216, 801423, 801443, 801393, 801389, 801437, 801425, 801415, 613251
Herewith declares, on our own responsibility, that the machinery
- is in conformity with the provisions of the Machinery Directive (89/392/EEC), as amended with
91/368 EEC, 93/44 EEC, 93/68 EEC and with national implementing legislation
- is in conformity with the provisions of the provisions of the E.M.C. Directive (89/336/EEC), as amended
with 91/263 EEC, 92/31 EEC, 93/67EEC , 93/68 EEC and with national implementing legislation
- is in conformity with the provisions of the provisions of the Low Voltage Directive (73/23/EEC), as
amended with 93/68 EEC and with national implementing legislation
and that
- the following (parts/clauses of) harmonized standards have been applied: EN: 292-1, 292-2, 292-3,
1050, 418, 982, 1037, 60204-1,61310-1, 61310-2, 457, 614-1, 1005-3, 563, 50081-2, 50082-2, 12895,
ISO: 3744, 3746,
- the following (parts/clauses of) national technical standards and specifications have been used: NA
Home Find... Go To..
Home Find... Go To..
S
The machine is maintained regularly - per the
maintenance instructions provided.
S
The machine is maintained with manufacturer
supplied or equivalent parts.
MACHINE DATA
Please fill out at time of installation for future reference.
Model No.-
Install. Date -
Serial No.-
E 2002, 2003 Tennant Company
3
4
4
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2100, 2120, 2150, & 2260 HANDLE GROUP 130
5
5
5
5
6
6
7
7
8
8
9
9
10
(Directive 89//392/EEC, Annex II, sub A)
Printed in the Czech Republic
. . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . .
2100/2120/2140/2150/2200/2260 (07-03)
11
12
130
132
134
136
138
140
142
144
146
148
150
154
154
156
Publicidad
Capítulos
Tabla de contenido
