Machine Operation; Operating Machine - Tennant 2100 Serie Manual De Operador Y Lista De Repuestos

3. Position the pad driver/brush on the drive motor
hub and turn it counter-clockwise to engage
(Figure 7).
4. Return machine to the upright position.

MACHINE OPERATION

FOR SAFETY: Do not operate machine unless
operator manual is read and understood.

OPERATING MACHINE

WARNING: Do Not Use Flammable Liquids Or
Operate Machine In Or Near Flammable Liquids,
Vapors Or Combustible Dusts.
This machine is not equipped with an explosion
proof motor. The electric motor will spark upon
start up and during operation which could cause a
flash fire or explosion if machine is used in an
area where flammable vapors/liquids or
combustible dusts are present.
1. Plug the power cord into a grounded wall outlet
(Figure 8).
Grounded Outlet
Grounding
Edge/hole
FOR SAFETY: Do not operate machine unless
cord is properly grounded. Do not operate
machine with damaged cord or plug. Do not
operate machine with the use of an extension
cord.
2100/2120/2140/2150/2200/2260 (07–03)
FIG. 7
FIG. 8
Home Find... Go To.. Home Find... Go To..
2. For Dual Speed Models, select desired motor
speed. Position the dual speed selector switch
downward (slow) for scrubbing/stripping and
upward (fast) for spray buffing (Figure 9).
3. Lower the handle to a desired operating height by
pulling the handle height adjustment lever.
Release lever to engage handle (Figure 10).
FIG. 10
4. Before starting the machine, hold the handle so
the machine base is parallel to floor (Figure 11).
This will reduce the abrupt jolt when starting the
machine.
FIG. 11
NOTE: For first time users, practice with a polishing
pad which is less aggressive.
OPERATION
FIG. 9
EN
7