Descargar Imprimir esta página

Danze D422257 Manual De Instrucciones página 2

Publicidad

Faucet Installation Procedures/Instalación del Grifo/Procédures d'installation du robinet
Danze always recommends that plumbing products be installed by a licensed professional.
Danze aconseja siempre que sea un profesional autorizado quien instale los productos de plomería.
Danze recommande que les articles de plomberie soient toujours installés par un professionnel qualifié.
1.
Shut off the main water supply before installation by turning the valves clockwise.
Antes de realizar la instalación, cierre el suministro principal de agua girando las
válvulas en sentido horario.
Fermez l'alimentation principale en eau avant l'installation en tournant les valves
d'alimentation dans le sens horaire.
2.
Apply silicone sealant around the bottom of spout trim ring.
Insert spout into 1-1/2" diameter mounting hole in deck from above.
Ponga sellante de silicona alrededor de la base del anillo
ornamental del grifo. Introduzca por arriba el vertedor en el
orificio de montaje de 1-1/2'' de diámetro situado en el soporte.
Appliquez l'enduit d'étanchéité à la silicone autour du bas
de la garniture circulaire de bec. Insérer le bec, par le dessus,
dans le trou de montage d'un diamètre de 1-1/2 po du tablier.
3.
From underneath the sink, install the rubber washer, metal washer, lock nut.
Install the hose onto the spout shank, and then secure the nut to fix.
Desde la parte de abajo de la pileta instale la arandela de goma, la
arandela metálica y la contratuerca. Instale la manguera en el vástago
del vertedor y apriete la tuerca para sujetarla.
Sous le lavabo, installer la rondelle en caoutchouc, la rondelle en
métal et le contre-écrou. Fixer le flexible à la tige du bec et serrer l'écrou.
4.
Remove the mounting hardware from the handle body.
Remueva los accesorios de montaje de la manivela.
Enlever le petit maté riel de fixation du corps de la manette.
Maintenance
Your new faucet is designed for years of trouble-free performance. Keep it looking new by cleaning it periodically
with a soft cloth. Avoid abrasive cleaners, steel wool and harsh chemicals as these will dull the finish and void your warranty.

Publicidad

loading