Mopar 82213232 Manual De Instrucciones página 10

10
32. Dual screen kit installation, locate the rear DVD
screen marked with an "PM" part number designation.
The part number is located on the label affixed to the
DVD screen (1).
33. Position the rear DVD screen into the rear bin of the
rear overhead console and connect the gray connec­
tor (2) to the black receptacle located on the rear DVD
screen (1).
34. Single screen kit installation, locate the front DVD
screen marked with an "PM" part number designation.
The part number is located on the label affixed to the
DVD screen (1).
35. Position the front DVD screen (1) into the bin cavity of
the overhead console.
36. Dual screen kit installation, route the dual screen
jumper harness (1) from the rear screen (3) forward
and secure the harness using the raised channels (2)
located in the overhead console.
37. Open the DVD screen (3) and install the fasteners.
Tighten the fasteners securely.
Dec 30, 2011 K6861508