Mopar 82213232 Manual De Instrucciones página 21

98. Using a trim stick, pry tool or equivalent, detach the
auxiliary power bezel (1) located on the driver side
quarter trim panel.
99. Disconnect the auxiliary power harness and remove
the bezel (1).
100. Remove the 12 volt auxiliary power receptacle from
the bezel.
101. Obtain the auxiliary power trim bezel (1) from the kit.
102. Vehicles equipped with 110V. power inverter, ob­
tain the template from the kit. Cut template out, align
and cut the bezel to accommodate the inverter.
103. Transfer the 12 volt auxiliary power receptacle to the
new bezel (1).
104. Align and position the auxiliary jack(s) (3, 5) into the
bezel (4).
105. Align and position the auxiliary jack bracket(s) (2, 6)
into the bezel (4).
106. Install the fasteners (1) as shown. Tighten the fas­
teners securely.
Dec 30, 2011
21
K6861508