Mopar 82213232 Manual De Instrucciones página 22

22
107. Feed the kit supplied auxiliary power harness (1)
through the coat hook opening and down the C­pillar,
behind the quarter trim panel and out the auxiliary
trim bezel opening.
108. Dual screen kit installation, using a fishtape or
equivalent, route the other end of the auxiliary power
harness (2) to the front of the rear console opening.
109. Single screen kit installation, using a fishtape or
equivalent, route the DVD overlay harness (1) from
the rear of the console opening to the front of the rear
console opening.
110. Connect the auxiliary power harness.
111. Connect the auxiliary jack harness.
112. Vehicles equipped with 110 volt power inverter,
install the inverter (2) into the bezel (1).
113. Secure the harness as needed with kit supplied tie
straps.
114. Install the trim bezel into the quarter trim.
115. Reverse steps 97­94 for re­installation.
Dec 30, 2011 K6861508