EB TECHNOLOGY START-S2XL Instrucciones Y Advertencias Para El Instalador página 44

8
3.00 Remote control: cancellation of the memory
The control unit dispose of a button PULSANTE P1 for different operation,
one is the cancellation of all codes inside the memory. To cancel make the following two steps.
The output of the control boards are not activated , eventually lights connections should be turned off.
1 Press and keep pressed the button PULSANTE P IN THE CONTROL UNIT, LED L1 is lit up.
After 6 seconds LED L1 will turned off and you can release the button P1.
LED L1 will flash for 4 times then it will flash regularly to memorize fixed code.
2
(1 regular flash only see next paragraph) . The memory has been cancelled.
3.01 Remote controls: code managing
To choose: which remote control should I memorize?
How will the receiver manage the codes?
START S2XL can manage fix and HCS rolling code, you can see how to memorize in the different ways.
The ouput of the control unit should be deactivated, eventually light connections should be turned off.
1
Press and release the button PULSANTE P1 , LED L1 will lit for 6 seconds. Then
In 6 seconds press and release button PULSANTE P1again,
2
LED L1 will flash once and it will lit for 6 seconds. Then
In 6 seconds press and release button PULSANTE P1 again,
3
LED L1 flashes twice and then regularly as under described
LED L1
1 regular flash
LED L1
2 shorts regular
flashing
This operation is possible only when the gate is closed.
This operation is possible only when the gate is closed.
LED L1 Only for compatible fixed code
The included receiver in the START S2XL can manage the major branded codes up
to 96bit, it memorize only the fixed part of the codes. Once you memorize the first code,
it can manage only the same type of code.
If the first remote control is a 12 bit ( for example dip-switch), the receiver will accept
only 12 bit codes of the same type. The HCS rolling code cannot be memorized.
LED L1 Only compatile HCS rolling code.
The receiver can manage the HCS rolling part like SMILE-H, prohibiting the duplication
of the remote control for safety reasons.