Steelcase Sync Instrucciones De Montaje página 3

®
HEALTH
3.
Remove foot cover(s). Remove the RH foot cover by
unsnapping the bottom corners and lifting upwards (3a)
then remove the LH foot cover by sliding forward (3b).
Disconnect and remove CPU's and monitors.
3a
LEG
COLUMN
LH FOOT
COVER
LEG
COLUMN
3b
RH FOOT
COVER
"SNAP"
LH FOOT
COVER
4.
For single leg and double leg bases, remove
bottom support rail by removing nuts (4a) and then
removing the bottom support rail (4b).
4a
BOTTOM
SUPPORT RAIL
4b
Page 3 of 33
939500404 Rev C