Publicidad
Idiomas disponibles
Idiomas disponibles
®
HEALTH
2.
For both ends of the single sided bases and
double leg bases, lift cable manager base
(2a) and remove front panel (2b). While still
lifing the cable manager base, proceed to
remove the wallside panel (2c). Repeat this
procedure for other end of unit.
3.
If replacing the cable manager base, loosen
the screws (3a) that attach the cable telescope
plate to the worksurface plate. Unhook the top
of the cable manager from the plate such that
the cable manager base can be slid up and
removed from the assembly. Reverse this
operation with the new cable manager base.
4.
For wallside panel of the single leg
base, repeat step 2. For the other end of
the single leg base, simply remove
freeside panel as shown.
3a
LOOSEN
SCREWS
2a
CABLE
MANAGER
BASE
2b
FRONT
PANEL
WALLSIDE
PANEL
4
b
2c
a
FREESIDE
PANEL
Page 3 of 12
939500407 Rev D
Publicidad
