Cleaning & Maintenance; Maintenance & Cleaning - Lacor 61671 Instrucciones De Uso Y Mantenimiento

Accessories (Not included)
Wire whisk
To use the wire whisk, use the assembly similar to the blender shaft, but only use the SLOW
speed. Do not force the wires or press excessively until deforming them, as they may
permanently lose their shape.
Extra-long blender shaft
Using the extra-long blender shaft provides a special extra length for blending or chopping large
quantities of food, and it also makes it possible to switch blades
(emulsifier, purée, multi-purpose and meat). When replacing the blades, be sure to
unplug the unit from the power supply and always use the supplied key, as indicated in the
photo.
Wall support
The wall support allows you to hang the blender chopper with the assembled blender shaft + a
blender shaft or wire whisk.
NOTE: Before making the holes for mounting it, ensure that their position and placement are
correct and suitable
CLEANING / MAINTENANCE
MAINTENANCE:
1.- Ensure the cooler is unplugged before cleaning or if the cooler is not in use.
2.- Wash the blender shaft by hand, never in the dishwasher. The motor head must never be
submerged in water or liquid.
3.- In order to clean the device, use non-aggressive detergents or dish cleaning products.
Never use harsh detergents or solvents.
4.- Keep appliance away from any heat source or direct sunlight.
5.- The blender chopper is an electrical appliance. To avoid injury or death from electrical
shock do not operate the wine cooler with wet hands, while standing on a wet surface or
while standing in water.
6.- Do not use outdoors or in wet conditions.
37