Maintenance And Cleaning - Lacor Mix & Go 69382 Instrucciones De Uso Y Mantenimiento

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 3
10.- The bottle plug includes a handle with an opening system designed for easy transportation
and hanging. Press the "clip" and let it go once it has been tied down well. Use it as best
suited for you.
MAINTENANCE:
1.- Ensure the cooler is unplugged before cleaning or if the cooler is not in use.
2.- To clean the cooler use only mild detergentsleaning products. Never use harsh detergents
or solvents.
3.- Keep appliance away from any heat source or direct sunlight.
4.- The wine cooler is an electrical appliance. To avoid injury or death from electrical shock do
not operate the wine cooler with wet hands, while standing on a wet surface or while
standing in water.
5.- Do not use outdoors or in wet conditions.
CLEANING:
1.- Once the blender has been used, switch off the engine and disconnect the plug, dismantle
the pieces to wash them in water, dry them, and assemble them again.
2.- Place the blade in the dishwasher if necessary, but to optimise cleaning, use a brush to remove
inaccessible residues.
3.- The Tritan bottles (600-300 ml) are dishwasher safe
4.- The main body cannot be washed in water. Clean it only with a damp cloth.
5.- Make sure that the appliance is stored in a dry, well-ventilated place, free from dampness.
MAINTENANCE / CLEANING
39

Publicidad

Tabla de contenido
loading

Tabla de contenido