Assembly Of The Chassis; Assembly Of The Back Wheels - Emmaljunga NXT 30 Manual De Instrucciones

Chassis

(1) Assembly of the Chassis

1.1 Unfolding the Chassis
1.2 Adjust the handle by pressing the grey buttons on the outside of the handlebar. Make sure that they click into
position.
WARNING! Ensure that children are kept away from all moving parts if you adjust the pram to avoid risk of injury.
1.3 Release the transport catch by releasing the grey clip.
To do this squeeze the chassis together.
WARNING There must not be a child in the pram when it is folded or unfolded
WARNING Avoid having children in the vicinity when the pram is folded or unfolded.
WARNING Ensure that children are kept away from all moving parts of the pram to avoid risk of injury.
1.4 The frontwheels should NOT be directing inwards when unfolding
1.5 The frontwheels should be directing outwards when unfolding
1.6 Fold out the rear leg.
1.7 Press the "Press" label on the bar in the middle of the chassis until you hear a clear "click"
1.8 Make sure that you now see the closed padlock.
WARNING ALWAYS check before use that the chassis is locked.the closed padlock will be shown.
1.9 WARNING If the open padlock is visible, the chassis is NOT locked.
WARNING If the open padlock icon is visible, press down on the metal bar, the chassis locks and you will hear
'click'. Never use the stroller if the symbol with the open padlock is visible.
1.10 Pull out the telescopic handle.
1.11 Lock both grey clicks on the right and left of the handlebars. Make sure that the telescopic handlebar
clips are properly locked with a "click".
Make sure that the handlebar is at the same height on both sides before you lock into place.
WARNING Ensure that children are kept away from all moving parts if you adjust the pram to avoid risk of injury.
1.12 Adjust the handle by pressing the grey buttons on the outside of the handlebar. Make sure that they click
into position.
WARNING! Ensure that children are kept away from all moving parts if you adjust the pram to avoid risk of injury.
1.13 Raise the backrest until it clicks in position
1.14 Raise the frontbar until it clicks in position
1.15 Adjust the foot-rest. Press both of the buttons on each side of the frame to adjust the footrest.
Please Note! Maximum weight on the footrest is 3kg.
WARNING Never let your child stand on the footrest.
WARNING Always check that the seat unit is in one of the positions by pushing it back until it locks into place.
WARNING Ensure that children are kept away from all moving parts of the pram to avoid risk of injury.

(2) Assembly of the Back Wheels

2.1 Wipe dirt from the axles before you put on the wheels.
Press the button on the rear wheel. Insert the metal shaft axle in the rear wheel.
Ensure that the shaft clicks into the wheel
WARNING Check that the wheels are firmly fixed and cannot be pulled off the shaft.
2.2 Push the axle shaft into the chassis.
2.3 Lock the shaft with the grey lock that sits on the brake bar. The shaft shall click in locked position.
Check that the rear wheel is attached to the chassis properly by pulling the wheel. Repeat on both sides.
WARNING Check that the wheel is firmly fixed and can not be pulled from the chassis.
WARNING Avoid driving over sharp objects or sufaces eg. glass or the tyre can be punctured
WARNING To achieve optimum handling and to avoid punctures, air pressure should be correct. Please check
the air pressure at regular intervals (see marking on the tyre).
NXT 30 v 1.7
31