Danby DKC054A1BSLDB Guía De Utilización Y Cuidado Para El Propietario página 10

Installation Instructions
BEER KEG INSTALLATION INSTRUCTIONS
Install the four castors. The two locking castors should be placed at the front. Four screw holes have
been pre-drilled into the unit's bottom at each corner for each castor. Put the plastic washers provided
on the front castors before installing them.
Castor Brake Guide
The two front castors are supplied with brakes to ensure the unit does not move excessively while
being used. It is recommended to engage the brakes while the unit is in use to avoid damage to the
unit, the contents or your personal property.
Installation of CO
Install the metal support provided onto the four studs
located on the exterior back wall of the chassis.
Align the holes in the support with the studs and push
down fi rmly.
Put washers on the
front casters.
Fig. 1
Step on to
brake
Cylinder Support
2
METAL
Castors
WASHERS
7
Fig. 2
Step on to
release brake