Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Installation Instructions
Spanner Faucet Wrench
Spanner faucet wrench (provided) is for either removing or tightening the
faucet connection.
Note: To prevent leakage, use the provided wrench to further tighten the
faucet connection.
Plastic Faucet Lever
Attach the black plastic lever (pull handle) to the top of the faucet by
tightening it by hand going clockwise until the end, holding in the silver nut
underneath so it does not turn. If there is still a small drip from the faucet,
you may have overtightend the silver nut and may need to unscrew silver
snug going counter-clockwise (as shown one turn).
DISPENSING OF BEER
•
Keep beer keg refrigerated at all times.
•
Never allow beer lines to dry out.
•
Use clean glassware before pouring.
•
Hold glass at a 45° angle, when it is 2/3 full, start to straighten glass as the glass fi lls.
•
Always make sure the faucet handle is pushed all the way back.
1/2 barrel
1/4 barrel
1/6 barrel
1/8 barrel
Note: The refrigerator compartment cannot accommodate the "Coors" style beveled barrel keg.
Note: Our keg cooler accepts domestic kegs up to 16-1/8" in diameter and up to 23-3/8" in height.
Check with your distributor to make sure keg is correct size.
Note: It is important to allow the keg to sit upright and undisturbed, for 2 hours before tapping.
Keg sizes that can be used in your keg cooler
59 Liters
15.5 gals
30 Liters
7.8 gals.
20 Liters
5.2 gals.
15 Liters
4.0 gals.
1984 oz.
992 oz.
661 oz.
496 oz.
11
164 x 12-oz. Glasses
82 x 12-oz. Glasses
55 x 12-oz. Glasses
41 x 12-oz. Glasses
Publicidad
Tabla de contenido
