SOMFY Sonesse 30 RTS Manual De Usuario página 17

Sonesse 30 RTS
2.5.5.Erasing control points from memory
To delete all the programmed control points,
press and hold the drive head programming
button until the motorised product briefly moves
up and down twice.
→ All programmed control points are deleted and
green LED blinks 5 times.
2.5.6.Erasing sensors from memory
1] To delete all the programmed sensors,
press and hold the Prog. button (A) on the
programmed control point or the drive
head programming button until the
motorised product briefly moves up and
down.
ð Green LED blinks 5 times then orange
LED blinks slowly.
2] Press and hold the Prog. button (C) on the
RTS sensor until the motorised product
briefly moves up and down twice.
→ All programmed sensors are deleted and green
LED blinks 5 times.
2.5.7.Erasing the memory of the drive (factory default)
To reset the drive, press and hold the drive head
programming button until the motorised product
briefly moves up and down 3 times.
→ All the settings are erased. Green LED blinks 5
times then orange LED is fixed on.
2.5.8.Temporary sleeping mode
CAUTION
The motorised product must be programmed.
©
Copyright 2020 SOMFY ACTIVITES SA. All rights reserved.
1]
A
PROG.
2]
C
PROG.
EN
x2
x2
x3
17