Installation; Assembly - SOMFY Sonesse 30 RTS Manual De Usuario

EN

2.INSTALLATION

WARNING
• These instructions are mandatory for the home motorisation and
automation professional installing the drive.
• Comply with current standards and legislation in the country of installation.
CAUTION
• Never drop, knock or puncture the drive or immerse it in liquid.
• Install an individual control point for each drive.
• To insure optimized silent operation, the gaps between the drive, the
accessories, the tube and the tube end piece must be minimized.
• Never cut or remove the cable label.

2.1.Assembly

2.1.1.Replace the head cover with a different color (Optional)
NOTICE
Head has interchangeable covers to fit with the fabric.
1] Unclip the cover.
2] Clip the new cover on the head.
2.1.2.Preparing the drive
CAUTION
• Sonesse 30 RTS : interior diameter of the tube has to be Ø27.7 mm or
greater.
• The crown is mandatory.
6
©
Copyright 2020 SOMFY ACTIVITES SA. All rights reserved.
Sonesse 30 RTS