Incorrect Operation - Yale Tigrip TVB 500 Manual De Instrucciones

12
Make sure that when depositing the load, the crane hook does not press against the load
lifting attachment. The weight of the crane hook could lead to opening of the load lifting
attachment.
Only use crane hooks with a safety latch.
The suspension eye of the load lifting attachment must have sufficient space in the crane hook
and be freely articulating.
In the case of malfunctions, stop using the load lifting attachment immediately.
I O
NCORRECT PERATION
(list not complete)
Do not exceed the rated load capacity (WLL) of the unit.
Only loads within the specified jaw capacity must be picked up.
Any modifications of the load lifting attachment are prohibited.
It is forbidden to use the load lifting attachment for the transportation of persons.
When transporting loads ensure that the load does not swing or come into contact with other
objects.
Only one load may be transported at a time with the load lifting attachment.
It is forbidden to apply lateral tensile forces to the load lifting attachment.
The load lifting attachment must always be lowered down onto the load until the spreader
beam stop is reached.
©
2016 Columbus McKinnon Industrial Products GmbH