Installing The Dryer; Step 1 (Position And Level The Dryer); Step 2 (Connect Dryer Exhaust System) - Alliance Laundry Systems LES33A Instrucciones De Instalación

Installing the Dryer . . .

Step 1:
Position and Level
the Dryer
For further assistance refer to Section on Location
Requirements.
Install dryer before washer. This allows room for
attaching exhaust duct.
Place the dryer in position, and adjust the legs until the
dryer is level.
Step 2:
Connect Dryer Exhaust System
For further assistance refer to Sections on Location
Requirements and Dryer Exhaust Requirements.
WARNING
A clothes dryer produces combustible lint.
To reduce the risk of fire and combustion
gas accumulation the dryer MUST be
exhausted to the outdoors.
• DO NOT use plastic or thin foil flexible ducting.
• Locate dryer so exhaust duct is as short as possible.
• Be certain old ducts are cleaned before installing
your new dryer.
• Use 4" (10.2 cm) diameter rigid or flexible metal
duct.
• Use as few elbows as possible.
• Use duct tape on all joints.
• Failure to exhaust dryer properly will void
504607
DRYER
BASE
D259I
W116
DO
NOTE: Venting materials are not supplied with the
dryer (obtain locally).
LEVEL
LEVELING
LEG
D314IE0C
DON'T
D298IE1A
D315IE0C
5