Safety Instructions - Senco PC1286EU Instrucciones De Operación

SAFETY INSTRUCTIONS

WARNING
TO AVOID SEVERE PERSONAL INJURY OR
PROPERTY DAMAGE, BEFORE USING THE TOOL,
READ CAREFULLY AND UNDERSTAND THE
FOLLOWING "SAFET Y INSTRUCTIONS"
PRECAUTIONS ON USING THE
COMPRESSOR IMPORTANT
INFORMATION
Most accidents that result from compressor operation and
maintenance are caused by the failure to observe basic
safety rules or precautions. An accident can often be
avoided by recognizing a potentially hazardous situation
before it occurs, and by observing appropriate safety
procedures. Basic safety precaution are outlines in the
"SAFETY" section of this Instruction Manual and in the
sections which contain the operation and maintenance
instructions. Hazards that must be avoided to prevent
bodily injury or machine damage are identified by
WARNINGS on the compressor and in this Instruction
Manual. Never use this compressor in a manner that has
not been specifically recommended by manufacturer,
unless you first confirm that the planned use in will be
safe for you and others.
DEATH OR SERIOUS BODILY INJURY COULD RESULT
FROM IMPROPER OR UNSAFE USE OF COMPRESSOR,
TO AVOID THESE RISKS, FOLLOW THESE BASIC
SAFETY INSTRUCTIONS. HIGH PRESSURE COMPRESSOR
PROVIDES BOTH HIGH PRESSURE AND REGULAR
PRESSURE AIR. FOR USAGE OF HIGH PRESSURE AIR.
● NEVER TOUCH MOVING PARTS
Never place your hands, fingers or body parts near the
compressor's moving parts.
● NEVER OPERATE WITHOUT ALL GUARDS IN PLACE
Never operate the compressor without all guards or safety
features in place and in proper working order. If
maintenance or serving requires the removal of a guard
or safety features, be sure to replace the guards or safety
feature before resuming operation of the compressor.
● ALWAYS WEAR EYE PROTECTION
Always wear safety goggles or equivalent eye protection.
Compressed air must never be aimed at anyone or any
part of the body.
● PROTECT YOURSELF AGAINST ELECTRIC SHOCK
Prevent body contact with grounded surfaces such as
pipes, radiators, ranges and refrigeration enclosures.
Never operate the compressor in damp or wet locations.
● DISCONNECT THE COMPRESSOR
Always disconnect the compressor from the power
source and remove the compressor air from the air
tankbefore servicing, inspecting, maintaining, cleaning,
replacing or checking any parts.
● AVOID UNINTENTIONAL STARTING
Do not carry the compressor while it is connected to its
power source or when the air tank is filled with
compressed air. Be sure the knob of the pressure switch
in the "OFF" position before connecting the compressor
to its power source.
● STORE COMPRESSOR PROPERLY
When not in use, the compressor should be stored in
dry place. Keep out of reach of children. Lock-out the
storage area.
● KEEP WORK AREA CLEAN
Cluttered areas invite injuries. Clear all work areas of
unnecessary tools, debris, furniture, etc.
● KEEP CHILDREN AWAY
Do not let visitors contact compressor extension cord.
All visitors should be kept safely away from work area.
● DRESS PROPERLY
Do not wear loose clothing or jewelry. They can be
caught in moving parts. Wear protective hair covering to
contain long hair.
● DON'T ABUSE CORD
Never yank it to disconnect from receptacle. Keep cord
from heat, oil and sharp edge.
● MAINTAIN COMPRESSOR WITH CARE
Follow instructions for lubricating. Inspect cords
periodically and if damaged, have repaired by
authorized service facility.
● USE A SAFE EXTENSION CORD
In order to prevent an electric shock, use a 3-core
extension cord with a 3-pole earthing plug and 3-core
earhting plug socket. Make sure that the extension cord
is in the good working condition. If the cord is damaged,
replace or repair it. The cord should have a sufficient
capacity for the current running to the product. The cord of
an insufficient capacity will cause a voltage drop or an
electric power loss, resulting in overhearing. The
following table shows the cord size used depending on
the cord length. If the compressor is to be use outdoors,
use an exclusive extension cord.
● STAY ALERT
Watch what you are doing. Use common sense. Do not
operate compressor when you are tired. Compressor
should never be used by you if you are under the
influence of alcohol, drugs or medication that makes
you drowsy.
● CHECK DAMAGED PARTS AND AIR LEAK
Before further use of the compressor, a guard or other
part is damaged should be carefully checked to
determine that it will operate properly and perform its
intended function. Check for alignment of moving parts,
binding of moving parts, breakage of parts. Mounting,
air leak, and any other conditions that may affected its
operation. A guard or other part that it damaged should
be properly repaired or replaced by an authorized service
center unless otherwise indicated elsewhere in this
Instruction Manual. Have defective pressure switches
replaced by authorized service center. Do not use
compressor if switch does not turn it on and off.
3