1
2
3
4
5
1. Wall Mount
2. °C / °F: toggle temperature display unit
3. SEARCH
4. EU / UK switch (RTGR383HG)
US TIME ZONE button (RTGR383HGA)
5. Battery Compartment Cover
6. RESET
7. Channel Switch (1 - 5)
8. Battery compartment
GETTING STARTED
SETTING UP THE CLOCK
Insert batteries before first use, matching the polarity (+
and -). RESET after each battery change.
UNIT
Main unit
6
7
Remote sensor
8
NOTE Do not use rechargeable batteries. It is
recommended that you use alkaline batteries with
this product for longer usage and lithium batteries for
temperatures below freezing.
SETTING UP THE SENSOR
1. Slide the rear panel off the sensor.
2. Open the battery compartment cover using a small
3. Insert the batteries, matching the polarity (+ and -)
4. Set the channel switch. Select a different channel
4
indicates the batteries are low.
LOCATION
Clock display area
Weather display area
screwdriver.
as shown in the battery compartment.
for each sensor.