Before The First Use - Tristar AT-5445 Manual De Usuario

BEFORE THE FIRST USE

• Take the appliance and accessories out the box. Remove the
stickers, protective foil or plastic from the device.
• Place the device on a flat stable surface and ensure a minimum
of 10 cm. free space around the device. This device is not
suitable for installation in a cabinet or for outside use.
• Put the power cable into the socket. (Note: Make sure the
voltage which is indicated on the device matches the
local voltage before connecting the
device. Voltage 220V-240V 50Hz)
• Fill the water tank.
1. Rotate the small knob to release the water tank.
2. Pull out the water tank.
3. Add water into the tank to at least the minimum level but don't
exceed the maximum level indicator.
4. Pour water into the ice box and put in the freezer until it is
completely frozen.
5. Put the frozen ice boxes into the water tank.
• The frozen ice boxes can be put in the water tank to increase the
cooling effect.
Do not use the cooling / evaporator function if the water tank is
empty or if the water level is below the minimum mark, it can severely
damage the pump.
USE
• Swing : Use the swing button to turn on the oscillation mode. The
airflow will now move from side to side.
• Off : Press the off button to turn the device off.
• Low/Middle/High : Press the speed buttons to select the desired
airflow speed. There are three levels to choose from (low, middle
and high speed).
• Humidification : Press the humidification button to turn on the
humidification cooling function. The unit will act as a evaporator
now. If combined with the ice boxes, this unit can lower its
surrounding temperature even more.
• If you want to use the ice boxes, remember to put it in the freezer
beforehand. Use them when they are completely frozen.
Instruction manual
EN
5