Operating Mode; Description - Samoa 366760 Guía De Servicio Técnico Y Recambio

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Display LCD
The "LCD" of the METER features two
numerical registers and various indications
displayed to the user only when the
applicable function so requires.
1. Partial register (5 figures with moving
comma FROM 0.1 to 99999) indicating
the volume dispensed since the reset
button was last pressed.
2. Indication of battery charge.
3. Indication of calibration mode.
4. Totals register (6 figures with moving
comma FROM 0.1 to 999999), that can
indicate two types of Total:
4.1. General Total that cannot be reset
(TOTAL).
4.2. Resettable total (Reset TOTAL).
5. Indication of total multiplication factor
(x10 / x100).
6. Indication of type of total, (TOTAL / Reset
TOTAL).
7. Indication of unit of measurement of
Totals:
L=Litres
8. Indication of Flow Rate mode.
9. Indication of unit of measurement of
Partial:
Q
=Quarts
ts
L=Litres
1
2
3
Samoa Industrial, S.A. · Box 103 Alto Pumarín · 33211 Gijón - Asturias Spain · Tel.: +34 985 381 488 · Fax.: + 34 985 384 163

Operating mode

G
=Gallons
al
p
=Pints
ts
G
=Gallons
al
4
6
5

Description

Users buttons
The meter features two buttons (RESET and
CAL) which individually perform two main
functions and, together, other secondary
functions.
1. Main functions performed:
- For the RESET key, resetting the partial
register and Reset Total.
- For the CAL key, entering instrument
calibration mode.
2. Secundary functions:
Used together, the two keys permit
entering configuration mode where the
desired unit of measurement can be set.
Below is the legend of the symbols used to
describe the actions to be performed:
Short pressure of CAL key.
Long pressure of CAL key.
short pressure of RESET key.
Long pressure of RESET key.
9
8
7
3
R. 10/12 836 828

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

366761

Tabla de contenido