Screen Settings - Elcometer 456 IPC Guia Del Usuario

4 GETTING STARTED (continued)
The battery condition is indicated by a symbol in the top right of the
display ( ):
Full symbol (orange) = batteries at full capacity
4
Empty symbol (red, flashing) = batteries at lowest
4
sustainable level
4.3 SELECTING YOUR LANGUAGE
1 Press and hold the ON/OFF button until the Elcometer logo is
displayed.
2 Press Menu/Setup/Language and select your language using the
é ê softkeys.
3 Follow the on screen menus.
To access the language menu when in a foreign language:
1 Switch the gauge OFF.
2 Press and hold the left softkey and switch the gauge ON.
3 Select your language using the

4.4 SCREEN SETTINGS

A number of screen settings can be defined by the user via
Menu/Setup/Screen Settings including:
Screen Brightness; This can be set to 'Manual' or 'Auto' - the
Ÿ
brightness is adjusted automatically using the gauge's ambient
light sensor.
Screen Timeout; The display will dim if inactive for more than
Ÿ
15 seconds and will go 'black' if inactive for the period defined.
The gauge can also be set to switch off automatically after 5
minutes of inactivity via Menu/Setup/Gauge Auto Off.
Screen Rotation; Using the internal accelerometer, the gauge
Ÿ
rotates the display to allow the user to measure or read values at
0°, 90°, 180° and 270° orientation if 'Auto Display Rotation' is
selected via Menu/Setup/Auto Display Rotation.
www.elcometer.com
é ê
softkeys.
R
4