Publicidad
Idiomas disponibles
Idiomas disponibles
CD-Coin Holder or Cupholder
THIS SHEET PERTAINS TO INSTALLATION OF
CD-COIN HOLDER OR CUPHOLDER UNIT BIN
(C).
NOTE: FORWARD BIN DOES NOT NEED TO BE
REMOVED FROM CONSOLE TO INSTALL CD-
COIN HOLDER/CUPHOLDER UNIT.
BIN (C) WITH CUPHOLDER INSTALLED:
BIN (C)
CD-COIN HOLDER UNIT:
FLEXING SNAP
FEATURES (X4) AND
LEAD-IN POCKETS
CD-Coin Holder or Cupholder
ALL INFORMATION WITHIN
DATE
ABOVE BORDER TO BE PRINTED
EXACTLY AS SHOWN ON 8.5 x 11
WHITE 16 POUND NON-BOND
RECYCLABLE PAPER.
PRINT ON BOTH SIDES, EXCLUD-
ING TEMPLATES.
TO BE UNITIZED IN ACCOR-
DANCE WITH GMSPO SPECIFI-
CATIONS.
SNAP FEATURES AND
LEAD-IN RIBS FOR CD-
COIN HOLDER OR
CUPHOLDER UNIT
INSTALL (X4)
CUPHOLDER
UNIT:
REVISION
AUTH
1. Position unit as shown, lining up lead-in pockets with
mating ribs.
2. Apply force to snap unit into position. Unit will lock tightly
into place.
* SNAP FEATURES ARE COMMON TO BOTH CUPHOLDER
AND CD-COIN HOLDER UNIT. CAN INSTALL INTERCHANGE-
ABLY USING FORWARD OR REAR LOCATION.
REMOVAL: NEED TO REMOVE UNIT IN REAR SLOT POSI-
TION BEFORE REMOVING UNIT IN FORWARD POSITION.
PART NO.
IR 23JN06
INSTALLATION INSTRUCTIONS
DR
TITLE
CD-Coin Holder or Cupholder
PART NO.
19158347
6200 Grand Pointe Dr., Grand Blanc, MI 48439
19158347
SHEET
3
SHEET
3
9
OF
9
OF
Publicidad
