Sanus VMF408 Manual De Instrucciones página 16

4 Install Wall Plate Covers and Cable Management (Optional)
1. Mount the upper cover [05] using the 1⁄8 in. hex key [30] and four screws [24].
2. Mount the lower cover [05] using the 1⁄8 in. hex key [30] and four screws [24] while (optional) fi tting the rear mount of the cable managment
assembly [04] between the cover [05] and the lower horizontal of the wall plate [03].
NOTE: Do not install the rear mount of the cable management assembly [04] unless you intend to install the front mount of the cable
management assembly [04] in Step 6.
[05]
16
[24]
[30]
[24]
[05]