Declaration Of Conformity - SIOUX 1SM Serie Instrucciones Y Lista De Piezas

GENERAL OPERATION
"1SM" LEVER OPERATED TOOLS
These tools are started by depressing the lever. The output spindle of the tool will not turn until the clutch is engaged by applying pressure
to the fastener after the air motor has started.
"1OM" TRIGGER OPERATED TOOLS
These tools are started by depressing the trigger. The output spindle of the tool will not turn until the clutch is engaged by applying
pressure to the fastener after the air motor has started.
Both lever operated and trigger operated reversing tools have a button to depress to reverse the air motor. Always depress the
button fully to obtain full power. The reversing button can be locked in the reverse direction by fully depressing and rotating the
button clockwise.
ADJUSTABLE CLUTCH OPERATION
Adjustable clutch tools will continue to ratchet when the preset torque is reached and can only be stopped by removing the tool from the
fastener.
Adjustable clutches are adjusted externally with the use of Sioux No. 2366 clutch adjustment wrench or a #1 (3/16", 4.8mm Dia. shank)
Phillips screwdriver. Clutch adjustment is accomplished by rotating the clutch cover until the slot in the clutch case appears. Turn the output
spindle of the tool with a 1/4 (6.4mm) hex key wrench until the groove in the adjusting washer is aligned with the slot in the clutch case.
Insert the clutch adjustment wrench into the groove and push to fully engage the teeth. Turn the clutch adjustment wrench counterclock-
wise to increase the torque.
Three clutch springs are available and are color coded for torque range.
#66050 green spring 2-20 in-lb (.23-2.26 N
#66049 blue spring 15-35 in-lb (1.7-4 N
#66048 silver spring 30-50 in-lb (3.39-5.6 N
We, Sioux Tools Inc., 250 Snap-on Drive, P.O. Box 1596, Murphy, NC, 28906, USA, declare under our sole responsibility that the products
1OM1101, 1OM1201, 1OM1301, 1OM1401, 1OM1501, 1OM1601, 1OM1103, 1OM1203, 1OM1303, 1OM1403, 1OM1503, 1OM1603,
1OM1105, 1OM1205, 1OM1305, 1OM1405, 1OM1505, 1OM1605, 1OM1107, 1OM1207, 1OM1307, 1OM1407, 1OM1507, 1OM1607,
1OM2101, 1OM2201, 1OM2301, 1OM2401, 1OM2501, 1OM2601, 1OM2103, 1OM2203, 1OM2303, 1OM2403, 1OM2503, 1OM2603,
1OM2105, 1OM2205, 1OM2305, 1OM2405, 1OM2505, 1OM2605, 1OM2107, 1OM2207, 1OM2307, 1OM2407, 1OM2507, 1OM2607,
1OM4303PQ, 1SM1101, 1SM1201, 1SM1301, 1SM1401, 1SM1501, 1SM1601, 1SM1701, 1SM1103, 1SM1203, 1SM1303, 1SM1403,
1SM1503, 1SM1603, 1SM1703, 1SM1105, 1SM1205, 1SM1305, 1SM1405, 1SM1505, 1SM1605, 1SM1705, 1SM1107, 1SM1207,
1SM1307, 1SM1407, 1SM1507, 1SM1607, 1SM1707, 1SM2101, 1SM2201, 1SM2301, 1SM2401, 1SM2501, 1SM2601, 1SM2103,
1SM2203, 1SM2303, 1SM2403, 1SM2503, 1SM2603, 1SM2105, 1SM2205, 1SM2305, 1SM2405, 1SM2505, 1SM2605, 1SM2107,
to which this declaration relates are in conformity with the following standard or standards or other normative document or documents:
June 1, 2003
Murphy, North Carolina, USA
Date and place of issues
.
m)
. m)
. m)

DECLARATION OF CONFORMITY

1SM2207, 1SM2307, 1SM2407, 1SM2507, 1SM2607
Includes products with 'Y' in the catalog number
EN 792(draft), EN 292 Parts 1&2, ISO 8662, Pneurop PN8NTC1
following the provisions of
89/392/EEC as amended by 91/368/EEC & 93/44/EC Directives.
Gerald E. Seebeck
President
Sioux Tools Inc.
Name and position of issuer
Signature of issuer
2