About This Unit; Controls And Functions - Yamaha YRS-2100 Manual De Instrucciones

ABOUT THIS UNIT

Controls and functions

Controls and functions
Front panel
2
3
4
1 INTELLIBEAM MIC jack
Connect the supplied IntelliBeam microphone for AUTO SETUP
(☞p. 11).
2 Front panel display
Shows information about the operational status of this unit.
(☞p. 47)
3 PHONES jack
For connecting headphones. (☞p. 26)
4 Remote control sensor
Receives infrared signals from the remote control. (☞p. 48)
5 SURROUND STATUS indicator
Lights up according to the input signal.
Displayed
color
Blue Following surround audio signal formats:
Dolby TrueHD, Dolby Digital Plus, DTS-HD
Master Audio, DTS-HD High Resolution, Multi-
channel Linear PCM
Orange Surround audio signal other than above
Off Audio signal other than above or no signal
46
En
1
5
Input signal
9
8
7
6
6 VOLUME +/- key
Controls the volume of the unit. (☞p. 20)
7 INPUT key
Selects playback component. (☞p. 9)
8
key
Turns on the unit or set it to the standby mode.
Note
In the standby mode, this unit consumes a small amount of
power in order to receive infrared signals from the remote
control or to search for HDMI signals.
9 System indicator
Lights up to show the system condition.
Light Power
Green On
Red Standby
Standby
Off Standby
YRS-1100
HDMI Interlock
CONTROL Mode
(☞p. 39) (☞p. 29)
– –
On Off
Off On
Off Off