KREAFUNK aSound Manual página 7

while the speaker enters search mode.
3. Start the Bluetooth function on your
mobile device and look for "aSound"
in the Bluetooth device list (depending
on the Bluetooth version of your device
you may have to enter the pass code
'0000').
4. After successfully connecting, the
LED will change to solid blue.
Note:
- If the pairing was not successful, turn
off the speaker and re-pair again.
- After successful pairing, paired
devices will remember each other so
there is no need to pair again unless
pairing information is deleted.
- To pair with a new device, just follow
steps 1-4 above after un-pairing the
existing device.
7
English