Clock Adjust; Language Select; Counters Display And Reset; How To Access Programming - LaCimbali S/200 Manual De Instalación

Tabla de contenido

Publicidad

English
To adjust the clock use keys "+" and "-" (30).
The time increases (or decreases) by one minute at each pressure
of the key.
If the keys (30) are kept pressed down, the speed increases. The
day changes each time the time display reaches "0:00".
N.B. Variation of the time is not possible if the clock function has
been deactivated (by the installing technician).
To display the messages in a language other than the one set press
the key "
" (31).
The display (5) provides a choice of the following languages.
Italian, English, French, German, Dutch, Portuguese and Japanese.
The counters are displayed when key "n°" (27) is pressed.
To reset the counters keep the RESET key (24) pressed until reset is
obtained.
Once the reading and reset of the counters is completed, press key
"n°" (27) once again or the key EXIT (25) to return to the main screen
(EXPRESSOTIME)
4. How to Access Programming (only if user programming is activated)
To access programming press
key PROG (29). The message
illustrated on the right is displayed
and all the dispenser key leds
will flash.
Press one of the coffee
dispensing keys (the associated
led will remain lit and not flash).
This message will be displayed:
Press one of the milk dispensing
keys (the associated led will
remain lit and not flash). This
message will be displayed:

1. Clock adjust

2. Language Select

3. Counter Display and Reset
Select. setting
Choose a selection
5. Selection Programming – Coffee
Selection xx
1 Coffee MM1
Water dose
100
Coffee dose
2,3
5.1 Selection Programming – Milk
Selection xx
Milk
Time milk
10,0
No froth for
2,0
ESPRESSOTIME
Monday
12:30
Clock function
activated
ESPRESSOTIME
Italiano
Lunedì
12:30
Example
of Italian
N° coffee
35
N° water
54
N° milk
28
Reset
NO
Counter reading
To program another function,
press PROG (29) again. To quit
programming press EXIT (25).
The main screen will be
displayed.
To vary the water dose (flowmeter) use keys "+" and "-" (30).
To vary the coffee dose (grinding time) first press key "
then move the flashing cursor (arrow) to the bottom line, then press
keys "+" and "-" (30).
To vary the milk dispensing time use keys "+" and "-" (30).
To vary the "no emulsion" time (time of dispensing of unwhipped milk)
press the key "
" (31) move the flashing cursor to the bottom
line, then press keys "+" and "-" (30).
N.B. To program a key for the dispensing of hot milk (unwhipped) the
"no emulsion" time must be set at a value higher than the "milk time".
English
ESPRESSOTIME
Machine ON
Clock function
deactivated.
ESPRESSOTIME
English
Monday
12:30 P.M.
Example
of English
N° coffee
00
N° water
00
N° milk
00
Reset
YES
Counter reset
ESPRESSOTIME
Monday
12:30
" (31)

Publicidad

Capítulos

Tabla de contenido
loading

Este manual también es adecuado para:

S/100C/100C/200

Tabla de contenido