GM 19170239 Instrucciones De Montaje página 3

10. Remove the tape liner from the bottom of the tape. Push
part to fascia from bottom of part, going up and against
lower fascia first, ironing the tape to fascia. Figure 4.
FIGURE 4
SUPPLIED PUSH
PINS
11. Remove tape liner from top of tape. Push part against
fascia from lower point going up, making sure the top end
locator engages the edge of the fascia. Figure 3.
12. Press the guard against the fascia, ironing the tape with 20-
30 lbs. force. Figure 5.
FIGURE 5
SUPPLIED PUSH
PINS
13. Push all four pin heads into pin body.
14. Repeat the procedure for the opposite side.
Splash Guards
ALL INFORMATION WITHIN
DATE
ABOVE BORDER TO BE PRINTED
EXACTLY AS SHOWN ON 8.5 x 11
WHITE 16 POUND NON-BOND
RECYCLABLE PAPER.
PRINT ON BOTH SIDES, EXCLUD-
ING TEMPLATES.
TO BE UNITIZED IN ACCOR-
DANCE WITH GMSPO SPECIFI-
CATIONS.
TAPE
REVISION AUTH
PART NO.
REV15MY08
INSTALLATION INSTRUCTIONS
DR
TITLE
PART NO.
19170239
6200 Grand Pointe Dr., Grand Blanc, MI 48439
19170239
SHEET
Splash Guards
3
SHEET
3 9
OF
9
OF