GM 19170566 Guia De Inicio Rapido

Chrome Fuel Door
Kit Contents:
Item
Fuel Door Assembly
M6 T30 Torx Pan Head Screw
M6 Nut
Instruction sheet
Tools Required:
T30 Torx Driver
7mm Socket with extension
Electric Drill
Plastic Trim Stick
10mm box end Wrench
BEFORE YOU START:
· Read all instructions prior to starting.
FASTENER NOTICE: Use the correct fastener in the correct
location. Replacement fasteners must be the correct part
number for that application. Do not use paints, lubricants, or
corrosion inhibitors on fasteners or fastener joint surfaces.
These coatings affect fastener torque and joint clamping force
and may damage the fastener. Use the correct tightening
sequence and specifications when installing fasteners in order to
avoid damage to parts and systems.
Chrome Fuel Door
ALL INFORMATION WITHIN DATE
ABOVE BORDER TO BE PRINTED
EXACTLY AS SHOWN ON 8.5 x 11
WHITE 16 POUND NON-BOND
RECYCLABLE PAPER.
PRINT ON BOTH SIDES, EXCLUD-
ING TEMPLATES.
TO BE UNITIZED IN ACCOR-
DANCE WITH GMSPO SPECIFI-
CATIONS.
Quantity
1
2
2
1
REVISION AUTH
Removal of existing fuel door assembly:
1. Open fuel door.
2. Remove three 7mm screws (1) holding the fuel cup housing (2)
in place.
3. Unscrew gas filler cap.
4. Use Plastic Trim Stick to disengage fuel cup housing
retaining tabs. See Figure 1A.
5. Remove fuel cup housing (2).
FIGURE 1A
2
1
6. Reinstall gas filler cap.
7. Drill out existing rivets (1) holding fuel door hinge in place.
8. Remove fuel door assembly (2).
9. Coat drilled holes with Supper Lube (GM 12371287) prior to
assembly.
FIGURE 2A
2
1
REV 15AP08
PART NO.
DR
TITLE INSTALLATION INSTRUCTIONS
PART NO.
19170566
6200 Grand Pointe Dr., Grand Blanc, MI 48439
19170566
SHEET
Fuel Door
1
SHEET
1
6
OF
6
OF