Program Customization - Hunter X-CORE Manual Del Usuario

EN
HIDDEN FEATURES

Program Customization

The X-Core is factory configured with three independent programs
(A, B, C) with four start times each for different plant type
requirements. The X-Core can be customized to display only one
program and one start time, hiding extra unneeded programs and
start times to ease programming.
1. Start with the dial in the RUN position.
2. Press and hold the - button. Turn the dial to the
WATER DAYS position.
3. Release the - button.
4. Use the + and - buttons to change program modes.
Normal Mode
(3 programs / 4 start times)
Limited Mode
(1 program / 1 start time)
28