Operation Hints; Spraying - Solo Port 423 Manual De Instrucciones

Operation hints

11. Operation hints
x
Before every use and before every start of the
mistblower check and ensure the machine is in
good and safe condition. (throttle operation,
ignition switch, safety devices, shoulder strap
and check for fuel leaks)
x
During the starting procedure and while
operating the mistblower, the operator must
have secure footing and have a safe body
position.
x
The engine starting site should be at least 3
meters away from the refueling site.

11.1 Spraying

Fig. 9
To open on tap:
Move lever upwards into position "I".
To shut off tap:
Move lever into horizontal position "O". When
shutting tap, move lever slowly against spring
tension to position "0". Do not let the lever flick
back.
Note:
For spot spraying (treatment of single plants or
smaller area), push the lever momentarily into
position "2" (spot spraying).
The correct output is obtained according to
dosage-sleeve setting
When spraying predominantly upwards (tall trees)
we recommend using the liquid pump offered as
an accessory (part no.: 44 00 117)
ENGLISH 10
All manuals and user guides at all-guides.com
Misting Output Guide
Dosage
sleeve
Position 1 0,32 L/min
Position 2 0,63 L/min
Position 3 1,03 L/min
Position 4 1,46 L/min
*) The delivery values when using a liquid pump
(accessories) apply to every position of the spray
wand.
Note: The liquid pump attachment comprises a
special metering body, which should be installed
when using a liquid pump.
Please note: When using a liquid pump, ensure
that the tank contains sufficient liquid. The
liquid pump can sustain severe damage, if it is
permitted to run dry. When using the
equipment as a mister and as blower, remove
the pump for that reason.
Fig. 10
Approach the target object with the engine at idling
speed. Accelerate to full engine speed, then open
formula on-off tap.
A B
*)
0,17 0,33 L/min
L/min
0,31 0,54 L/min
L/min
0,54 1,04 L/min
L/min
0,65 1,42 L/min
L/min
C