Reversible Latch - G-U B-11260 Instrucciones

3.

Reversible latch

a)
QTx20
To change latch position follow the below procedure:
a) Push latch slightly and loose counter sunk screw
b) Pull latch out of forend, rotate in axial positon by 180° and reinsert latch
c) Push latch slightly, insert screw and fix tight.
(Torque 2 to 2,5 Nm).
NOTE
b)
For versions with reversible latch, DIN L is the
standard delivery position.
Required tool: Socket key Tx20 (not contained in
scope of delivery).
c)
PTx20
2-2,5Nm
15