Publicidad
P45
Issue 9701
N
ote
These controls are designed for use only
as operating controls. Where an operating
control failure would result in personal
injury or loss of property it is the
responsibility of the installer to add devices
or systems that protect against, or warn of,
control failure.
T
ime delay switch
The time delay switch is a trip-free, expansion
rod device actuated by a resistance heater
which is wired as an integral part of the control.
Models are available for 50, 90 or 120 seconds.
A. Cap for sealed adjustment (factory set)
B. Reset button
C. Conduit opening: 22.3 mm hole for PG16 nipple or conduit connector
© 1997 Johnson Controls Inc.
Order No. PD-P45-E
A
B
Fig. 2
P45 interior.
O
ptional construction note
(For quantities only)
Time delay switches.
-
For 12 V and 24 V ac/dc and 120 Vac are
available on request.
-
30, 45 or 60 sec. time delay.
Pressure connections.
-
Controls with 90 cm capillary with 1/4"
braze connection (style 34) may be
supplied on quantity orders, when
specified.
Various.
-
PG nipple
-
Field adjustable setpoint
-
Bulk pack
-
Mounting bracket
C
3
Catalogue Section 6
Publicidad
