Playing A Cd Or Md; (With Optional Cd/Md Unit) - Sony CDX-C8000RX Manual De Instrucciones

Playing a CD or MD

(with optional CD/MD unit)

1
Press (SOURCE) repeatedly to select
"CD" or "MD."
2
Press (MODE) until the desired unit
appears.
CD/MD playback starts.
All the discs in the current CD/MD unit is
played from the top.
Changing the display item
Each time you press (DSPL/PTY) during MD,
CD or CD TEXT disc playback, the item
changes as follows:
Disc number*
Elapsed playback time
Disc name*
Track name*
FM1 frequency*
1 While an optional CD/MD unit is connected.
*
2
If you have not labelled the CD or CD TEXT disc,
*
or if there is no disc name prerecorded on the
MD,"NO D.Name" appears in the display.
3
If you playback a CD TEXT disc, the artist name
*
appears in the display after the disc name.
(Only for CD TEXT discs with the artist name.)
4 If the track name of a CD TEXT disc or MD is not
*
prerecorded,"NO T.Name" appears in the
display.
5 While the AF/TA function is activated.
*
12
V
1 /Track number/
V
2 /Artist name* 3
V
4
V
5
When you connect an optional CD unit, you
can label CD and CD TEXT discs with a
personalised name using the disc memo
function. Refer to "Labelling a CD" (page 15).
However, if you use personalised labels, they
will always take priority over the original CD
TEXT information when such information is
displayed.
After you select the desired item, the display
will automatically change to the Motion
Display mode after a few seconds.
In the Motion Display mode, all the items are
scrolled in the display one by one in order.
Tip
The Motion Display mode can be turned off. (See
"Changing the sound and display settings" on
page 37).