Flush Fitting Recommendations - Fagor CFI-4GLSTANAT Manual De Instalación Y Utilizacion

1/ INSTALLING YOUR APPLIANCE

• FLUSH FITTING RECOMMENDATIONS

• 4 Burner Model
(underside view of the housing)
Fig. 01
A Mounting brackets
• 2 Burner Model
(underside view of the housing)
A
Fig. 01
A Mounting holes
— Place your hob in the support cabinet
opening and carefully draw the hob towards
you.
— Re-position the burner heads, burner
covers and pan supports on the hob.
Connect the hob to the gas supply (See "Gas
Connection" chapter) and to the power
supply (See "Electrical Connection" chapter).
A
A
A
A
• 3 Burner Model
of the housing)
Fig. 01
A Mounting holes
Fig. 02
Cabinet
Mounting bracket
Fig. 03
— If you wish, you can immobilise the hob
using the four mounting brackets (supplied
with screws) (Fig. 02) to attach them to the
four corners of the housing. You must use the
holes provided for this purpose, according
to the diagram above (Fig. 02) .
— Stop screwing when the mounting bracket
becomes deformed.
Do not use an electric screwdriver.
8
(underside view
A A
A A
Mounting holes
located using
arrows
Screw