Hitachi PC-ARH Manual De Instalación Y Funcionamiento página 10

Operation
12
5. OPERATION
■
Touch Pad and LCD Display
Model: PC-ARH(E)
PC-P5H1E

Operation Mode Indicator

Alarm Code Indicator
Appears when the air conditioner is in abnormal condition.

Auto Control Indicator
Appears when the operational condition is limited.

Check Indicator
Lights up during the check mode.

Temperature Indicator

Swing Louver Indication

Fan speed indicator

TEMP (Temperature setting) switch
The setting temperature can be set by using the switch.

Swing Louver switch.
Start the swing operation by pressing this button. Stop the
swing louver operation by pressing the button again. At this
point the louver stops at an angle indicated by the direction of

the mark " ".

FAN SPEED (Fan Speed Selection) Switch
By repeatedly pressing the button, the setting will change
sequentially.

MODE (Operation Mode Selection) Switch

: FAN
 
: COOL
 
: HEAT

: DRY
 
: AUTO
By repeatedly pressing the button, the setting will change
sequentially, "COOL", "FAN" or "HEAT", "FAN" (for H3:01
operation mode change restriction), "COOL", "HEAT", "DRY"
and "FAN" (for H3:02 without restriction).

RUN/STOP Switch
Operation can be started or stopped by pressing this switch

RUN LED (Green).
Indicates that the unit is working