Monitor Operation - Fermax MICROLINE Manual De Instrucciones

KIT
VIDEOMICRO 5 HILOS
VIDEOMICRO 5 HILOS

MONITOR OPERATION

Receiving a Call
HIGH RESOLUTION
FLAT MONITOR
1
2
- +
Manual Activation of the Monitor (auto-start)
HIGH RESOLUTION
FLAT MONITOR
1
2
- +
Opening the door
HIGH RESOLUTION
FLAT MONITOR
1
2
- +
Disconnection for long absences
Settings Control
- +
• The call tone is different
depending on where it
comes from (panel 1 or 2).
The video is activated
automatically.
- +
• Once the audio and the video (or only the video) have
been activated with the outdoor panel, press the button
to open the door.
• On / Off switch. With the monitor
disconnected, the call tone will not function either.
• Adjust the call volume with the volume control.
The indicator led lights up when the volume is at the
minimum.
• With the screen on, adjust the brightness and contrast
using these controls.
HIGH RESOLUTION
FLAT MONITOR
1
2
- +
With the monitor in stand-by:
• Press the
to activate the audio and the video (the
HIGH RESOLUTION
FLAT MONITOR
duration of the communication with the panel is
1
limited to 90 seconds).
2
•Press the
second camera) for more than 1 second in order
to activate the video (in this case, the camera
will remain active for 30 seconds).
• Pick up by pressing
• Speak / Listen, by pressing and
releasing this button
• End the communication
pressing the
communication will in any case end
after 90 seconds.).
button for more than 1 second.
button (or
1
2
.
by
button (the
if there is a
Page 15