GM 20929727 Instrucciones De Instalación

Cadillac SRX Grille
Tools Required
Screwdriver
Flat Bladed Tool
Nylon Wedge
Removal of Current Grille
1. Remove the front compartment side sight shield push in re-
tainer (Quantity 4).
2. Remove the front compartment side sight shield (Quantity 2).
3. Reposition the hood front seal ends that are held in place with
4 plastic retainers that are part of the weatherstrip. Carefully
pull the weatherstrip to the right/left to release from the retain-
ers on the side sight shield.
4. Remove the last push-in retainer from the front sight shield.
5. Lift the side sight shield upward in the back and slide rear-
wards from under the end of the front sight shield.
FIGURE 1
Grille
ALL INFORMATION WITHIN
DATE
ABOVE BORDER TO BE PRINTED
EXACTLY AS SHOWN ON 8.5 x 11 12NO09 Initial Release - Jeffrey Peterson
WHITE 16 POUND NON-BOND
RECYCLABLE PAPER.
PRINT ON BOTH SIDES, EXCLUD-
ING TEMPLATES.
TO BE UNITIZED IN ACCORDANCE
WITH GM SPECIFICATIONS.
REVISION AUTH
EFVKTA/
1206029
6. Remove the front compartment front sight shield push-in re-
tainer (Quantity 6).
7. Remove the front compartment front sight shield.
FIGURE 2
8. Remove the radiator air lower deflector retainers (Quantity 20).
9. Remove the radiator air lower deflector.
FIGURE 3
IR 12NO09
PART NO.
INSTALLATION INSTRUCTIONS
DR
TITLE
20929727
PART NO.
20929727
SHEET
Grille
1
SHEET
1 6
OF
6
OF