GM 20920007 Instrucciones De Instalación

Installation Instruction to Install Accessory Rear Accent
1. Remove rear fascia assembly from the vehicle and place on a
covered protective surface.
2. Remove accent strip spring clips:
a. Depress and remove (4) spring clips (part number
11562364).
Retain for reuse.
2a
3. Remove accent strip:
a. Depress the center of plastic snaps (2) places and remove
accent strip from fascia by pulling it rearward.
Accessory Rear Accent
ALL INFORMATION WITHIN
DATE
ABOVE BORDER TO BE PRINTED
EXACTLY AS SHOWN ON 8.5 x 11 03MY12
WHITE 16 POUND NON-BOND
RECYCLABLE PAPER.
PRINT ON BOTH SIDES, EXCLUD-
ING TEMPLATES.
TO BE UNITIZED IN ACCORDANCE
WITH GM SPECIFICATIONS.
3a
REVISION
Initial Release - Michael Pavliscak
4. Install accessory accent strip:
a. Line up and insert the (6) tabs on the accessory accent
strip into the (6) slots in the rear fascia.
5. Install accessory accent strip spring clips:
a. Depress and install (4) spring clips (part number
11562364) into the square holes in the on the (4) acces-
sory accent strip tabs.
5a
6. Install rear fascia assembly onto vehicle.
IR 03MY12
INSTALLATION INSTRUCTIONS
AUTH DR
TITLE
1571739
PART NO.
4a
20920007
PART NO.
Accessory Rear Accent
20920007
1 3
SHEET OF
1 3
SHEET OF