Publicidad
12
12
V
CC
SILVER 7/8" MACHINE SCREW
(4 used in this step)
Carefully stand your unit upright.
Fasten a DOOR (L) to the LEFT END (B). Use the screws in the HINGES. See the next step for door adjustments.
NOTE: You may need to loosen the mounting screw and adjusting screw to slide them part way out of the slot. Retighten the screw
before you mount the HINGE to the MOLDING.
Fasten a PULL (V) to the DOOR (L). Use two SILVER 7/8" MACHINE SCREWS (CC).
Repeat this step for the other DOOR (L).
Page 16
B
L
Adjusting screw (horizontal)
www.sauder.com/services
Mounting screw (depth)
413043
Publicidad
