Publicidad
14
14
(4 used)
To cover HIDDEN CAMS
Z
(16 used)
Push the RUBBER SLEEVES (AA) over the METAL PINS (Z). Insert the METAL PINS into the hole locations of your choice in the
ENDS (A and B) and UPRIGHTS (C and D). Set the ADJUSTABLE SHELVES (M and N) onto the METAL PINS.
Apply the WARNING LABEL (BB) to the TOP (G). You should be able to read the label when the TV is removed from the unit.
When the TV is in place, it should hide the label. Peel off the backing and apply the label as shown in the diagram.
NOTE: This is a permanent label intended to last for the life of the product. Once applied, do not try to remove it.
Push a CAM COVER (Y) onto each visible HIDDEN CAM.
NOTE: Please read the back pages of the instruction booklet for important safety information.
This completes assembly. Clean with your favorite furniture polish or a damp cloth. Wipe dry.
Page 18
Y
25 lbs.
B
N
25 lbs.
D
35 lbs.
M
AA
www.sauder.com/services
BB
G
135 lbs.
M
25 lbs.
C
25 lbs.
40 lbs.
WARNING
Never use this furniture with a TV that is
too large or too heavy. Severe injury or
death can occur. The TV and furniture
will be unstable and may tip.
- The TV must weigh less than 135 lbs.
- The base of the TV must be able to sit
completely on this shelf.
25 lbs.
N
25 lbs.
35 lbs.
A
413043
Publicidad
