Publicidad
Idiomas disponibles
Idiomas disponibles
motor block 3 is completely dry before the next time it is used.
2. Rinse all accessory parts manually, except for the motor block 3.
3. Allow all parts to dry completely before you put them away or use the device again.
Some cleaning tips
• Clean the device as soon as possible after use in order to prevent food remnants from drying on.
• After processing very salty or acidic types of food, you should immediately rinse the blade insert 6
thoroughly.
Storage
DANGER for children! Keep the device out of the reach of children.
DANGER! In order to avoid accidents, the mains plug 2 must never be connected to a wall socket while
in storage.
• Assemble the multi chopper for storage purposes. This allows the blade insert 6 to be stored safely.
• Select a location where neither high temperatures nor moisture can affect the device.
Trouble-shooting
If your device fails to function as required, please try this checklist first. Perhaps there is only a minor
problem, and you can solve it yourself.
DANGER! Risk of electric shock!
Do not attempt to repair the device yourself under any circumstances.
Fault
No Function
Blade insert 6 does not
rotate or only rotates
with great difficulty
Vessel 7 looks cloudy
due to hard food
Disposal
The symbol showing a wheelie bin crossed through indicates that the product requires separate refuse
collection in the European Union. This applies to the product and all accessories marked with this
symbol. Products identified with this symbol may not be discarded with normal household waste, but
must be taken to a collection point for recycling electric and electronic appliances.
Recycling helps to reduce the consumption of raw materials and protect the environment.
Packaging
When disposing of the packaging, make sure you comply with the environmental regulations
applicable in your country.
Technical specifications
Mains voltage: AC230V, 50Hz
Protection class: II
Power rating: 260 W
Max. continuous operation (KB):1 minute
Possible causes/ Action
Has the device been connected to the power supply?
Check the connection.
Is the top edge of the working cover 4 clean?
• Switch off immediately, pull out mains plug 2 and check:
- Blockage in the vessel?
- Food too tough or too hard?
- Device not assembled correctly?
• This is normal and does not affect the function.
- 14 -
Publicidad
