Working Advice; Care And Maintenance; Customer Service; Disposal - Rothenberger ROSCOPE mini Instrucciones De Uso

3.5

Working Advice

Check the area that you want to inspect and pay particular attention to obstructions or hazard areas.
Bend the camera cable in such a manner that the camera head can be easily inserted into the area
subject to the inspection.
Carefully guide the camera cable in.
Adjust the brightness of the illumination light so that the image can be seen well. For heavily reflect-
ing objects, as an example, less light will provide a better image.
When objects to be inspected are represented unsharp, reduce or increase the distance between
camera head and object.
4

Care and Maintenance

Do not immerse the hand unit into water or other fluids.
Keep the inspection camera clean at all times. Clean the inspection camera and all auxiliary aids par-
ticularly thorough after having worked in areas with substances that are hazardous to one's health.
Wipe off debris using a moist and soft cloth. Do not use any cleaning agents or solvents.
Especially clean the lens of the camera regularly and pay attention for any lint.
5

Customer service

The ROTHENBERGER service locations are available to help you (see listing in catalog or on-line)
and replacement parts and service are also available through these same service locations.
Order your accessories and spare parts from your specialist retailer or using RoService+ online:
Phone: + 49 (0) 61 95 / 800 – 8200
Fax: + 49 (0) 61 95 / 800 – 7491
Email: service@rothenberger.com
www.rothenberger.com
6

Disposal

Components of the unit are recyclable material and should be put to recycling. For this purpose regis-
tered and certified recycling companies are available. For an environmental friendly disposal of the
non-recyclable parts (e.g. electronic waste) please contact your local waste disposal authority.
Old batteries can be taken to your specialist dealer who will dispose of them in conformity with envi-
ronmental regulations.
For EU countries only:
Do not dispose of electric tools with domestic waste. In accordance with European
Directive 2012/19/EU on waste electrical and electronic equipment and its implementa-
tion as national law, electric tools that are no longer serviceable must be collected
separately and utilised for environmentally compatible recycling.
ENGLISH 9